Silicon & Software Systems -S3- Announces Availability of Silicon Proven Mixed Signal IP For IEEE802.11 IC Designs
DUBLIN, Ireland--(BUSINESS WIRE)--Sept. 12, 2003--Silicon & Software Systems (S3), a leading supplier of mixed signal circuit solutions, today announced the availability of a range of IP for the analog front-end section of IEEE802.11a/b/g ICs. This IP is silicon-proven on TSMC's 0.18um CMOS process and has been characterized for applications in the multi-band WLAN market.
In a highly competitive market such as the WLAN chip sector, IC designers are facing schedules of less than 12 weeks from specification to tape-out including full chip integration. Many are turning to specialist design houses, such as S3, for fully characterized silicon upon which to base their designs. S3's IP can be delivered in matched "I&Q" pair configurations - ensuring minimum chip finishing requirements.
"Our customers are keen to use S3's IP to accelerate their chip integration and design cycle times," said Bob Tait, Product Marketing Manager at S3. "Using S3's IP removes significant risk from 802.11 WLAN product developments. This allows valuable engineering effort to be focused on clear differentiation in the system product design."
S3's portfolio of mixed signal IP includes 10 bit pipeline ADCs up to 80 MSPS and DACs up to 200MSPS with supporting PLL and reference circuits.
S3 will present their complete mixed signal portfolio at the TSMC Europe Technology Symposium, Brussels, on September 23rd next.
About Silicon & Software Systems Ltd. (S3):
Silicon & Software Systems Ltd. (S3) is an established electronics design company. S3 specializes in System Level Design and Integration in four market areas: Wireless Systems, Digital Consumer, Network Processing and Medical Systems.
S3 delivers leading edge design solutions in the areas of Wireless Connectivity (Bluetooth, 802.11, Zigbee, etc.) and Digital Telephony (GSM, 3G, DECT, PHS, etc.). These solutions are enabled by S3's wide variety of expertise in areas such as embedded Wireless SoC design, system integration, embedded software and lower layer software development. S3 provides solutions for both OEMs and IC vendors including hardware reference designs. The company specializes in the integration of wireless technologies into end products for both the consumer and enterprise markets.
Approximately 50% of clients are U.S. based with the remainder based in Europe and the Asia/Pacific region. S3 was founded in Dublin, Ireland in 1986 and has operations in five countries: Ireland, U.S.A., the Netherlands, Poland and the Czech Republic.
S3 web site: www.s3group.com
S3's Mixed Signal Solutions Center: www.s3group.com/design/ic/mixed
All trademarks contained herein (whether registered or not) and all associated rights are recognized.
CONTACT: Silicon & Software Systems (S3)
Europe:
Eugene Cusack
Phone: +353 (91) 709 575
Email: eugene.cusack@s3group.com
or
USA:
Evan Kirstel
Phone: +1 (781) 685 4681
Email: evan.kirstel@s3group.com
DUBLIN, Ireland--(BUSINESS WIRE)--Sept. 12, 2003--Silicon & Software Systems (S3), a leading supplier of mixed signal circuit solutions, today announced the availability of a range of IP for the analog front-end section of IEEE802.11a/b/g ICs. This IP is silicon-proven on TSMC's 0.18um CMOS process and has been characterized for applications in the multi-band WLAN market.
In a highly competitive market such as the WLAN chip sector, IC designers are facing schedules of less than 12 weeks from specification to tape-out including full chip integration. Many are turning to specialist design houses, such as S3, for fully characterized silicon upon which to base their designs. S3's IP can be delivered in matched "I&Q" pair configurations - ensuring minimum chip finishing requirements.
"Our customers are keen to use S3's IP to accelerate their chip integration and design cycle times," said Bob Tait, Product Marketing Manager at S3. "Using S3's IP removes significant risk from 802.11 WLAN product developments. This allows valuable engineering effort to be focused on clear differentiation in the system product design."
S3's portfolio of mixed signal IP includes 10 bit pipeline ADCs up to 80 MSPS and DACs up to 200MSPS with supporting PLL and reference circuits.
S3 will present their complete mixed signal portfolio at the TSMC Europe Technology Symposium, Brussels, on September 23rd next.
About Silicon & Software Systems Ltd. (S3):
Silicon & Software Systems Ltd. (S3) is an established electronics design company. S3 specializes in System Level Design and Integration in four market areas: Wireless Systems, Digital Consumer, Network Processing and Medical Systems.
S3 delivers leading edge design solutions in the areas of Wireless Connectivity (Bluetooth, 802.11, Zigbee, etc.) and Digital Telephony (GSM, 3G, DECT, PHS, etc.). These solutions are enabled by S3's wide variety of expertise in areas such as embedded Wireless SoC design, system integration, embedded software and lower layer software development. S3 provides solutions for both OEMs and IC vendors including hardware reference designs. The company specializes in the integration of wireless technologies into end products for both the consumer and enterprise markets.
Approximately 50% of clients are U.S. based with the remainder based in Europe and the Asia/Pacific region. S3 was founded in Dublin, Ireland in 1986 and has operations in five countries: Ireland, U.S.A., the Netherlands, Poland and the Czech Republic.
S3 web site: www.s3group.com
S3's Mixed Signal Solutions Center: www.s3group.com/design/ic/mixed
All trademarks contained herein (whether registered or not) and all associated rights are recognized.
CONTACT: Silicon & Software Systems (S3)
Europe:
Eugene Cusack
Phone: +353 (91) 709 575
Email: eugene.cusack@s3group.com
or
USA:
Evan Kirstel
Phone: +1 (781) 685 4681
Email: evan.kirstel@s3group.com
<< Home